PTFE & Fluoropolymer Materials

AFT offers a range of compression moulded PTFE tube in virgin PTFE and has developed its own “AF” range of filled PTFE compounds.
With in-house moulding capability up to 1000mm diameter.

All materials manufactured or supplied by AFT are fully certified and tested.

AFT take great care to ensure that materials are of the highest quality, through careful processing techniques and quality control.

AFT has also developed a range of other Fluoropolymer materials; special grades of filled PEEK have been developed for applications involving wear, for low friction, or for higher temperature requirements. AFT can also offer “Victrex PEEK HT©” in virgin or filled grades.

Other materials include but are not limited to rods or tubes manufactured from FEP, PFA, and PCTFE.

Extruded rod and tube from 6-100mm diameter
Compression moulded PTFE tube and rod up to 1500mm diameter
Comprehensive range of filled PTFE materials
Victrex PEEK extruded rod or tube in natural or filled materials
Compression moulded PEEK and Fluoropolymer tubes
Victrex PEEK thin wall tubing
Large diameter thin wall rings in PEEK and Fluoropolymer

Extruded and moulded PTFE
PTFE thin wall tubing, smooth & coloured
Extruded and moulded PEEK
Injection moulded PEEK billets
Seamless large diameter rings in PEEK and Fluoropolymers
Precision ground material.

Contact Us

Phone:		+44 (0) 1992 515880 +44 (0) 1992 554480

E-mail:		Online Enquiry Form

Fax:		+44 (0) 1992 554490