Rotary seals are typically classified for applications under pressure, and for uses where no pressure is applied to them. We can supply both types of rotary seal.

Whatever you need rotary seals for, our expertise and experience means we can deliver. As you’ll see from the table below, our seals can operate at different pressures, temperatures and surface speeds. 

Profile Type Standard Material Pressure (bar) Temperature (°C) Surface Speeds (m/sec)
OS01 PU/POM*
NBR/POM*
FPM/PTFE
0,5
0,5
0,5
-30 to 100
-25 to 100
-20 to 210
5
10
25
OS02 PU/POM*
NBR/POM*
FPM/PTFE
0,5
0,5
0,5
-30 to 100
-25 to 100
-20 to 210
5
10
25
OS08 PU
NBR
- -30 to 105
-25 to 100
5
10
R03 PU/POM
NBR/POM
400
250
-30 to 100
-25 to 100
0,2
0,2
R04 PU
NBR
160
100
-30 to 105
-25 to 100
0,2
0,2
R04A PU
NBR
160
100
-30 to 105
-25 to 100
0,2
0,2
R05 PU
NBR
160
100
-30 to 105
-25 to 100
0,2
0,2
R05A PU
NBR
160
100
-30 to 105
-25 to 100
0,2
0,2
VR06 NBR - -25 to 100 25
VR07 NBR - -25 to 100 25
R08 PTFE/NBR 350 -25 to 100 0,4
R08D PTFE/NBR 350 -25 to 100 0,4
R09 PTFE/NBR 350 -25 to 100 0,4
R09A PTFE/NBR 350 -25 to 100 0,4
R10 PTFE/NBR 350 -25 to 100 0,4
R10A PTFE/NBR 350 -25 to 100 0,4
R11 PTFE/NBR 350 -25 to 100 0,4
RS19A PTFE/V-spring 150 -200 to 260 2
PS19A PTFE/V-spring 150 -200 to 260 2

*For technical reasons POM should be used up to a maximum temperature of 80°C only. For higher temperatures we recommend Aluminium/Steel.