ETFE coatings are a copolymer of Ethylene and TetraFluoroEthylene better known as Tefzel®.

Although not fully fluorinated, ETFE coatings have excellent chemical resistance and can operate at 150°C/300°F. The resins within these coatings are the toughest within the fluoropolymer range and can be applied at film builds up to 1,000 micrometers. ETFE is available in powder form.



ETFE coatings are designed to give uniform thick or thin film coatings and are based on a modified ETFE.

Changes in physical properties by radiation include reduced elongation while tensile strength remains unchanged. Stiffness is increased and electrical losses are increased.

These changes are independent of whether radiation took place in air or nitrogen. In the case of flex life however, a difference exists in that radiation in nitrogen gives a greater flex life than an equal dose in air.

This type of coating should be considered for a broad range of applications where you need the benefits of the following qualities:

  • High performance thermal
  • Chemical and electrical properties
  • Outstanding mechanical toughness
Excellent chemical resistance
Excellent heat resistance
First class cryogenic stability
Low coefficient of friction
Excellent electrical insulating properties
High dielectric strength
Virtually unaffected by UV or weather
Check chemical compatibility of ETFE
Choose a chemical (start typing)
Choose a material
Compatibility of +
20°C / 68°F 60°C / 140°F 100°C / 212°F
No Data
No Data
No Data
No Data
Expert Coatings

Whether you are a bakery that needs a better coating solution for your baking trays, or an oil & gas company looking for an effective coating solution for your components, we can help.

ETFE Coatings

Get in touch with our team of experts to discuss your project.

Our team are happy to answer any questions you have about using our products and services in your next project. Fill in your details below and we'll be in touch.