Tips to keep your industrial bakeware coatings in top condition

Bakeware coatings are a major help for all bakery environments, whether that be a small family run bakery to a full-scale plant bakery.


AN INTRODUCTION TO PTFE

PTFE (Polytetrafluoroethylene) is an extremely hard-wearing material used for a wide variety of applications and is well-known for its non-stick properties.


Xylan coatings in the off-shore oil industry

Whitford Xylan® coatings are widely used in the off-shore oil industry for a variety of applications such as bolts, fasteners, valves and connectors.


Advantages of Teflon Coatings

Teflon is a commonly know brand of PTFE, primarily used in the bakeware industry. This article looks at some of the benefits of Teflon coatings and the reasons why it's so popular.


Choosing the best PTFE filler for your application

PTFE can creep and deform under heavy loads, a disadvantage can be avoided by adding a filler in order to benefit from the properties of both materials. Fillers can also add properties such as improved thermal conductivity, for applications that demand good heat dissipation.


Are you sure your coating solution is the right one?

There are so many different possible coating solutions available, that choosing the right one can be a minefield. It’s important to get it right because there are a number of reasons why coatings can fail.


VIdeo: Non-Stick Coatings for Industrial Bakeware

In this video, our Sales & Marketing Director demonstrates how easy baking bread is with our non-stick coatings.


Victrex PEEK™ Material Properties Infographic

Victrex PEEK material is a semicrystalline thermoplastic typically used as a replacement for machined metals in a wide variety of high performance end-use applications.


The True Cost of Substandard Coatings

Have a look at the true costs of substandard coatings and get in touch with us to see just how much you can save by coating your bakeware equipment with us.


Common Coating Problems Part 2

This is the second part of our series looking at common coating problems that can crop up during the coating process. Here are AFT Fluorotec, we understand how these coating problems occur and how to prevent them. Coating Problem #8: Mud Cracking...