AF805 is a modified VICTREX PEEK material with special fillers.

Formulated to give greater flexibility than standard VICTREX PEEK materials and a much lower coefficient of friction. AF805 retains the essential properties of VICTREX PEEK being a semi-crystalline very high performance engineering thermoplastic designed for extremely demanding applications.

KEY PROPERTIES

Low coefficient of friction
Good chemical resistance
Good creep resistance
Good radiation resistance
Excellent rigidity
High maximum use temperature
Check chemical compatibiltiy of Victrex PEEK
Choose a chemical (start typing)
Choose a material
Compatibility of +
20°C / 68°F 60°C / 140°F 100°C / 212°F
Resistant
No Data
Resistant
No Data
Resistant
No Data
Resistant
No Data

Let's Talk

Got a question? Get in touch to discuss the chemical/material compatibility in depth.

Our team are happy to answer any questions you have about the chemical compatibility of Victrex PEEK. Fill in your details below and we'll be in touch.

TYPICAL PHYSICAL PROPERTIES OF MODIFIED VICTREX PEEK
Property Test Method Typical Values
Elongation ISO 527 25%
Coefficient of Friction <0.10
Specific Gravity ISO 527 1.44 g/cm3
Tensile Strength ISO 527 78 MPa
Coefficient of Thermal Expansion ASTM D696 7oC x10-5
Max Continuous use Temperature 260 OC
Flexural Strength 23oC 100 MPa
Flexural Modulus 23oC 2.8 GPa
Water Absortion %/ Hour at 23oC ASTM D 257 <0.1
Datasheet: Modified VICTREX PEEK
AF805 Modified PEEK 288kb

AF805 is a modified PEEK material with special fillers. Formulated to give greater flexibility than standard PEEK materials and a much lower coefficient of friction.

The Next Step
Whether you need help choosing the right material, or are looking for fluoropolymer components designed or manufactured, we can help. Call us on 01992 515880.
Contact Us